Removal Procedure
- Lower the midgate.
- Fold the hinged midgate filler trim panel (2) back.
- Release the trim cover retaining clips (1) from the sheet
metal.
- Raise the midgate to the closed position.
- Remove the rear floor trim panel by grasping and pulling straight out
to release the retaining clips.
- Remove the rear floor trim panel from the vehicle
Installation Procedure
- Raise the midgate to the closed position.
- Ensure that the retaining clips are securely
installed on the back side of the rear floor trim panel.
- Install the rear floor trim panel by pressing the retaining clips into
the sheet metal openings.