Removal Procedure
- Remove the windshield wiper arms. Refer to
Windshield Wiper Arm Replacement
.
- Remove the air inlet grille panel. Refer to
Air Inlet Grille Panel Replacement
in Body Front End.
- Remove the bolts retaining the wiper transmission
assembly to the vehicle.
- Carefully push the wiper transmission assembly rearward to disengage
the wiper motor from the slot in the plenum.
- Disconnect the wiper motor electrical connector.
- Remove the wiper transmission assembly from the cowl panel plenum.
Installation Procedure
- Position the wiper transmission assembly
to the cowl panel plenum.
- Connect the electrical connector to the wiper motor.
- Insert the wiper motor post into the slot in the plenum, push the transmission
assembly forward to seat the post.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts retaining the wiper transmission assembly to the vehicle.
Tighten
Tighten the wiper transmission assembly bolts to 8 N·m (71 lb in).
- Install the air inlet grille panel. Refer to
Air Inlet Grille Panel Replacement
in Body Front End.
- Install the windshield wiper arms. Refer to
Windshield Wiper Arm Replacement
.