Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Outside Rearview Mirror Schematics Connector End View Reference: Vehicle Access Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Verify the heated mirrors inoperative fault is present. Do the heated mirrors operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Does the rear window defogger operate properly? | Go to Step 4 | |
4 |
Does the test lamp illuminate? | Go to Step 6 | Go to Step 5 |
5 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 8 |
6 | Inspect for poor connections at the harness connector of the outside rearview mirror face. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 9 |
7 | Inspect for poor connections at the harness connector of the outside rearview mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
8 | Inspect for poor connections at the harness connector of the appropriate door module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 11 |
9 | Replace the appropriate outside rearview mirror face. Refer to Outside Rearview Mirror Glass Replacement . Did you complete the replacement? | Go to Step 12 | -- |
10 | Replace the appropriate outside rearview mirror. Refer to Outside Rearview Mirror Replacement . Did you complete the replacement? | Go to Step 12 | -- |
11 | Replace the appropriate door module. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
