GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
TrailBlazer - 2WD
🢒
Engine
🢒
Engine Electrical
🢒 Oil Level Indicator Tube Replacement
Removal Procedure
Remove the A/C line bracket nut.
Remove the A/C line bracket from the oil level indicator tube stud.
Disconnect the oxygen (O2) sensor electrical connector from the oil level indicator bracket.
Remove the oil level indicator tube stud.
Pull the indicator out of the tube.
Pull the tube out of the block.
Installation Procedure
Install the oil level indicator tube into the engine block.
Add sealant to the oil level indicator tube stud threads. Refer to
Adhesives, Fluids, Lubricants, and Sealers
for the correct part number.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the oil level indicator tube stud and tighten to
10 N·m (89 lb in)
.
Install the A/C line bracket to oil level indicator tube and secure with the nut then tighten to
7 N·m (6 lb in)
.
Connect the O2 sensor electrical connector.
Install the oil level indicator into the tube.