Defroster Valve Actuator Replacement for Chevrolet TrailBlazer - 2WD 2009

1. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement.



2. Disconnect the electrical connector from the defroster actuator.
3. Remove the screws from the defroster actuator.
4. Remove the defroster actuator.

1. Install the defroster actuator.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the defroster actuator screws.

Tighten
Tighten the screws to 1.9 N·m (17 lb in).

3. Connect the electrical connector to the defroster actuator.
4. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement.