GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 TrailBlazer - 2WD 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Floor Console Bracket Replacement

Removal Procedure
  1. Block the wheels to prevent the vehicle from moving.
  2. Remove the floor shift control knob. Refer to Floor Shift Control Knob Replacement.
  3. Remove the center console. Refer to Console Replacement.
  4. Disconnect the automatic transmission range selector cable. Refer to Range Selector Lever Cable Replacement.

    5. Object Number: 741605 Size: SH
  5. Disconnect the electrical connector from the automatic transmission shift interlock solenoid.
  6. Disconnect the electrical connector from the park brake.
  7. Remove the console bracket from the vehicle, by removing the retaining nuts (1) from the center instrument panel (I/P) bracket.
  8. Remove the forward retaining screw, if equipped.
  9. Remove the remaining fasteners from the console bracket.
  10. Remove the console bracket from the vehicle.
  11. Remove the floor shift control. Refer to Transmission Control Replacement.

Installation Procedure
  1. Install the floor shift control. Refer to Transmission Control Replacement.

    2. Object Number: 741605 Size: SH
  2. Install the console bracket to the vehicle.
  3. Loosely install all the fasteners that retain the console bracket to the vehicle.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the retaining nuts (1) to the center I/P bracket.

    5. Tighten
    Tighten nuts to 10 N·m (88 lb in).

  5. Install the remaining fasteners that retain the console bracket to the vehicle.

    6. Tighten
    Tighten the nuts to 25 N·m (18 lb ft).

  6. Connect the electrical connector to the park brake.
  7. Connect the electrical connector to the automatic transmission shift interlock solenoid.
  8. Connect the automatic transmission range selector cable. Refer to Range Selector Lever Cable Replacement.
  9. Install the center console. Refer to Console Replacement.
  10. Install the floor shift control knob. Refer to Floor Shift Control Knob Replacement.
  11. Remove the wheel blocks from the vehicle.