GM Service Manual Online
For 1990-2009 cars only
Table 1: Vehicle Communication Interface Module Scan Tool Data Parameters
Table 2: Vehicle Communication Interface Module Scan Tool Output Controls

Vehicle Communication Interface Module Scan Tool Data Parameters

Parameter

System State

Expected Value

Description

Operating Conditions: Ignition ON

Date

--

Numeric

This displays DD/MM/YYYY. This is the date the VCIM was manufactured.

GPS Signal

--

Yes

The scan tool displays Yes or No. Yes is displayed if there is a GPS signal received by the VCIM.

Signal Strength

--

68

The scan tool displays 0-100. This is the VCIM signal strength.

Signal Type

--

Digital

The scan tool displays Digital or Analog. This is the signal type received by the VCIM.

Time

--

Numeric

The scan tool displays HH:MM:SS. This is the current time.

Transceiver ID

--

Varies

The scan tool displays a 2-5 digit value. This is the transceiver identification number.

Vehicle Communication Interface Module Scan Tool Output Controls

Output Control

Description

Green LED

The VCIM illuminates the green LED on the inside rearview mirror when ON is selected.

Phone Call Test

When ON is selected, VCIM commands OnStar to connect to the OnStar Center.

Program Digital Home SID -- NID

Select SID (Station ID) and NID (Network Interface Device) per your location.

Program Phone Number

VCIM provides mobile ID number and mobile directory number for this vehicle. Use arrow keys to change the phone number if necessary.

Red LED

The VCIM illuminates the red LED on the inside rearview mirror when ON is selected.

Set Language

Pick an option between 3 different languages: English, French Canadian, and Spanish.

VCIM Setup

Screen displays: Move the vehicle to an open, outside area and make sure the vehicle is running. Following this VCIM setup procedure, a call will automatically be made to the OnStar Call Center. Inform the Call Center advisor that a new VCIM has been installed. Have the STID and ESN from the new VCIM ready to provide to the advisor. Refer to the Communication Interface Module Programming and Setup for more info.