Caution: Refer to Fastener Caution in the Preface section.
4.1. | Slide the boot (1) down revealing the terminal stud. |
4.2. | Remove the generator cable nut (2) from the terminal stud. |
4.3. | Remove the generator cable (3). |
Caution: Refer to Fastener Caution in the Preface section.
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
3.1. | Install the generator cable (3). |
3.2. | Install the generator cable nut (2) to the terminal stud. |
Tighten
Tighten the nut to 9 N·m (80 lb in).
3.3. | Slide the boot (1) over the terminal stud. |