Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Disconnect both the air inlet and air outlet pipes from the secondary air injection (AIR) reaction pump.
- Remove the electrical relay from the AIR pump bracket.
- Disconnect the electrical connector from the AIR pump.
- Remove the 3 bolts securing the AIR pump bracket to the vehicle frame.
- Remove the AIR pump from the vehicle.
Installation Procedure
- Install the AIR pump to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Install the 3 bolts securing the AIR pump bracket to the vehicle frame and tighten to
20 N·m (15 lb ft).
- Connect the electrical connector to the AIR pump.
- Install the electrical relay to the AIR pump bracket.
Note: Ensure the air inlet and air outlet pipes are clean and clear of any debris before connecting to the AIR pump.
- Connect both the air inlet and air outlet pipe to the AIR pump.
- Lower the vehicle.