GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
TrailBlazer - 4WD
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Ignition Coil Replacement
Removal Procedure
Remove the spark plug wire from the ignition coil.
Disconnect the ignition coil electrical connector.
Remove the ignition coil bolts.
Remove the ignition coil.
Installation Procedure
Install the ignition coil.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the ignition coil bolts and tighten to
8 N·m (71 lb in)
.
Connect the ignition coil electrical connector.
Connect the spark plug wire to the ignition coil.