GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1922202  Size: SH
  1. Disconnect the engine wiring harness electrical connector (1) from the manifold absolute pressure (MAP) sensor.

  2. Object Number: 1922215  Size: SH
  3. Remove the MAP sensor screw (1).
  4. Remove the MAP sensor (2).
  5. Inspect the MAP sensor seal for damage, replace as necessary.

Installation Procedure


    Object Number: 1922215  Size: SH
  1. Lubricate the MAP sensor seal with clean engine oil.
  2. Install the MAP sensor (2).
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the MAP sensor screw (1).
  5. Tighten
    Tighten the screw to 9 N·m (80 lb in).


    Object Number: 1922202  Size: SH
  6. Connect the engine wiring harness electrical connector (1) to the MAP sensor.