For 1990-2009 cars only
Removal Procedure
- Remove the air cleaner cover/resonator (2) then position the air cleaner element (6) and air outlet duct (3) out of the way. Refer to Air Cleaner Element Replacement.
- Remove the air inlet duct (5) from the lower air cleaner housing/washer solvent tank assembly (4).
- Disconnect the following electrical connectors:
- Remove the washer solvent level sensor wire harness from the wire harness retaining clips (3, 5).
- If applicable, disconnect the headlamp washer hose from the headlamp washer pump located on the lower air cleaner housing/washer solvent tank. Cap the headlamp washer pump outlet fitting to prevent loss of washer solvent.
- Disconnect the washer pump hoses (3) and plug the washer pump outlet ports to prevent loss of washer solvent.
- Remove the 2 air cleaner housing/washer solvent tank assembly retaining nuts (1) from the mounting studs.
- Lift the lower air filter housing/washer solvent tank assembly (2) off of the studs and remove the assembly.
| • | Windshield washer pump (1) |
| • | Headlamp washer pump (2), if equipped |
| • | Low solvent level sensor (4) |
| • | Lift gate washer pump (6), if equipped |
Installation Procedure
- Install the lower air filter housing/washer solvent tank assembly (2) onto the mounting studs.
- Connect the washer pump hoses (3) to the washer pumps.
- Install the 2 air cleaner housing/washer solvent tank assembly retaining nuts (1) to the mounting studs and tighten to 15 N·m (11 lb ft).
- If applicable, Connect the headlamp washer hose to the headlamp washer pump located on the lower air cleaner housing/washer solvent tank.
- Connect the following electrical connectors:
- Install the washer solvent level sensor wire harness to the wire harness retaining clips (3, 5).
- Install the air inlet duct (5) to the lower air cleaner housing/washer solvent tank assembly (4).
- Install the air cleaner element (6) and air outlet duct (3) to the lower air cleaner housing/washer solvent tank assembly.
- Install the air cleaner cover/resonator (2). Refer to Air Cleaner Element Replacement.
Caution: Refer to Fastener Caution in the Preface section.
| • | Windshield washer pump (1) |
| • | Headlamp washer pump (2), if equipped |
| • | Low solvent level sensor (4) |
| • | Lift gate washer pump (6), if equipped |
