GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement.

  2. Object Number: 295297  Size: SH
  3. Disconnect the electrical connector from the defroster actuator.
  4. Remove the screws from the defroster actuator.
  5. Remove the defroster actuator.

Installation Procedure


    Object Number: 295297  Size: SH
  1. Install the defroster actuator.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the defroster actuator screws.
  4. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  5. Connect the electrical connector to the defroster actuator.
  6. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement.