GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 TrailBlazer - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Rear License Plate Lamp Replacement

Removal Procedure

    Object Number: 742699 Size: SH
  1. Remove the 2 screws that retain the license lamp lens to the liftgate.

    2. Object Number: 742700 Size: SH
  2. Remove the license lamp lens from the liftgate.
  3. Remove the bulb (1) from the socket.

Installation Procedure

    Object Number: 742700 Size: SH
  1. Install the bulb (1) to the socket.
  2. Wipe the bulb to ensure the bulb is free of dirt or oil.

    3. Object Number: 742699 Size: SH
  3. Position the license lamp lens to the liftgate.
  4. Verify that the license lamp lens gasket is fully seated to the liftgate.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 2 license lamp lens retaining screws.

    6. Tighten
    Tighten the screws to 1.4 N·m (12 lb in).