Removal Procedure
- Remove the I/P carrier. Refer to
Instrument Panel Carrier Replacement.
- Remove the air temperature actuator-right retaining screws.
- Disconnect the air temperature actuator-right electrical connector.
- Remove the air temperature actuator-right.
Installation Procedure
- Install the air temperature actuator-right.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the air temperature actuator-right retaining screws.
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Install the air temperature actuator-right electrical connector.
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement.
- Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to
Actuator Recalibration.