Warning: A sudden release of pressure may cause personal injury or damage to the vehicle. The air suspension system is under pressure until the air supply lines are disconnected. Use the following precautions
when servicing the air suspension system:
• Wear gloves, ear protection, and eye protection. • Wrap a clean cloth around the air supply lines.
Note: Remove the air suspension system fuse before working on the rear suspension components or the rear axle. Failure to remove the air suspension system fuse could cause the calibration of the air suspension leveling sensors to change and the air suspension system not to function properly.
Caution: Refer to Fastener Caution in the Preface section.
Note: Ensure the color on the air supply lines match the color on the air spring compressor for reassembly.
Tighten
Tighten the air supply line fitting to 2.25 N·m (20 lb in).
Tighten
Tighten the bolts to 20 N·m (15 lb ft).
Note: When the air springs are completely deflated, an additional ignition cycle may be required to allow the compressor to completely inflate the air springs.