For 1990-2009 cars only
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
- Remove the stabilizer shaft insulator clamp mounting nut.
- Remove the stabilizer shaft insulator clamp.
- Remove the stabilizer shaft insulator from the stabilizer shaft.
Installation Procedure
- Install the stabilizer shaft insulator to the stabilizer shaft.
- Install the stabilizer shaft insulator clamp.
- Install the stabilizer shaft insulator clamp mounting nut and tighten to 75 N·m (55 lb ft).
- Lower the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
