GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the backup lamp socket assemblies from the backup lamp housings, if applicable. Refer to Backup Lamp Replacement.

  2. Object Number: 743497  Size: SH
  3. Remove the lower fascia push-pins.

  4. Object Number: 743499  Size: SH
  5. Remove the screws from the rear wheelhouse flanges.

  6. Object Number: 743498  Size: SH
  7. Remove the upper retaining bolts from the back of the fascia.
  8. Remove the fascia from the vehicle.

Installation Procedure


    Object Number: 743498  Size: SH
  1. Position the fascia to the vehicle impact bar.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the upper retaining bolts to the fascia.
  4. Tighten
    Tighten the bolts to 2.5 N·m (22 lb in).


    Object Number: 743499  Size: SH
  5. Install the screws that retain the fascia to the wheelhouse flanges.
  6. Tighten
    Tighten the screws to 4.5 N·m (40 lb in).


    Object Number: 743497  Size: SH
  7. Install and fully seat the lower push-pins.
  8. Install the backup lamp socket assemblies, if applicable. Refer to Backup Lamp Replacement.