GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 691037  Size: SH
  1. Remove the screw that retains the sealing strip to the door.
  2. Lift upward on the rear edge of the sealing strip.
  3. Remove the sealing strip from the pinch-weld flange.

Installation Procedure


    Object Number: 691037  Size: SH
  1. Install the sealing strip to the pinch-weld flange, starting at the forward edge of the door.
  2. Ensure that the sealing strip is fully seated to the pinch-weld flange.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the screw that retains the sealing strip to the door.
  5. Tighten
    Tighten the screw to 1.2 N·m (10 lb in).