Removal Procedure
- Open the liftgate.
- Remove the liftgate trim panel. Refer to
Liftgate Trim Panel Replacement.
- Remove the liftgate lock cylinder. Refer to
Liftgate Lock Cylinder Replacement.
- Remove the license plate pocket wiring harness retainers from the liftgate.
- Disconnect the main license plate pocket electrical connector.
- Remove the nuts retaining the license plate pocket to the liftgate.
- Remove the license plate pocket from the liftgate.
Installation Procedure
- Install the license plate pocket to the liftgate.
Caution: Refer to Fastener Caution in the Preface section.
- Install the nuts retaining the license plate pocket to the liftgate.
Tighten
Tighten the license plate pocket nuts to 10 N·m (89 lb in).
- Connect the main license plate pocket electrical connector.
- Install the license plate pocket wiring harness retainers to the liftgate.
- Install the lock cylinder. Refer to
Liftgate Lock Cylinder Replacement.
- Install the liftgate trim panel. Refer to
Liftgate Trim Panel Replacement.