GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 718025  Size: SH
  1. Remove the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement.

  2. Object Number: 718026  Size: SH

    Important: Ensure that the speaker electrical connector does not fall into the speaker opening.

  3. Remove the 3 screws that retain the speaker to the instrument panel (I/P) substrate.
  4. Disconnect the speaker electrical connector.
  5. Remove the speaker from the I/P.

Installation Procedure


    Object Number: 718026  Size: SH
  1. Install the speaker to the I/P.
  2. Connect the speaker electrical connector.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the 3 speaker retaining screws.
  5. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 718025  Size: SH
  6. Install the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement.