Table 1: | Indicators |
Table 2: | DIC Warning Messages |
Symbol | Reference |
---|---|
| |
| Air Bag: SIR System Description and Operation |
(Canada) | |
BRAKE (U.S.) | |
| |
(Canada) CHANGE ENG OIL (U.S.) | Refer to Indicator/Warning Message Description and Operation |
(Canada) CHECK GAGES (U.S.) | CHECK GAGES: Refer to Indicator/Warning Message Description and Operation |
CHECK GAS CAP | CHECK GAS CAP: Refer to Indicator/Warning Message Description and Operation |
(Canada) CRUISE (U.S.) | |
| Fasten Safety Belt: Seat Belt System Description and Operation |
FASTEN PASSENGER SAFETY BELT | FASTEN PASSENGER SAFETY BELT: Seat Belt System Description and Operation |
(Canada) GATE AJAR (U.S.) | GATE AJAR: Liftgate/Liftgate Window Ajar Indicator Malfunction |
| High Beam: Exterior Lighting Systems Description and Operation |
Low Fuel | Low Fuel: Refer to Indicator/Warning Message Description and Operation |
OVERSPEED | OVERSPEED: Refer to Indicator/Warning Message Description and Operation |
PARK BRAKE | Park Brake: Park Brake System Description and Operation |
(Canada) REDUCED ENGINE POWER (U.S.) | REDUCED ENGINE POWER: Engine Control Module Description for the 4.2L engine or Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine |
(Canada) SECURITY (U.S.) | SECURITY: Immobilizer Description and Operation |
(Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Engine Control Module Description for the 4.2L engine or Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L engine |
| Stability System Active: ABS Description and Operation |
| Tire Pressure Monitor: Tire Pressure Monitor Description and Operation |
| Turn Signals: Exterior Lighting Systems Description and Operation |
Message | Reference |
---|---|
BATTERY NOT CHARGING | |
CHANGE ENGINE OIL | Refer to Indicator/Warning Message Description and Operation |
CHECK OIL LEVEL | Refer to Indicator/Warning Message Description and Operation |
CHECK TIRE PRESSURE | |
CHECK WASHER FLUID | |
CURB VIEW ACTIVATED | |
DRIVER DOOR AJAR | |
ENGINE COOLANT HOT IDLE ENGINE | |
ENGINE OVERHEATED STOP ENGINE | |
FUEL LEVEL LOW | Refer to Indicator/Warning Message Description and Operation |
ICE POSSIBLE | Refer to Indicator/Warning Message Description and Operation |
KEYFOB X BATTERY LOW | |
LEFT REAR DOOR AJAR | |
OIL LIFE RESET | Refer to Indicator/Warning Message Description and Operation |
OIL PRESSURE LOW STOP ENGINE | Refer to Indicator/Warning Message Description and Operation |
PASSENGER DOOR AJAR | |
PROGRAM CLUSTER | Refer to Indicator/Warning Message Description and Operation |
REAR ACCESS OPEN | |
REAR WIPER OBSTRUCTION | |
RIGHT REAR DOOR AJAR | |
SEATBELT REMINDER | |
SERVICE AIR BAG | |
SERVICE BRAKE SYSTEM | |
SERVICE STABILITY SYS | |
SERVICE TIRE MONITOR | |
STABILITY SYS ACTIVE | |
STABILITY SYS DISABLED | |
STABILITY SYS READY | |
TIGHTEN FUEL CAP | Refer to Indicator/Warning Message Description and Operation |
TRACTION ACTIVE | |
TRACTION SYS LIMITED | |
TRANS HOT IDLE ENGINE | |
TURN SIGNAL ON | |
VEHICLE OVERSPEED | Refer to Indicator/Warning Message Description and Operation |
The instrument panel cluster (IPC) illuminates the CHANGE ENGINE OIL message when the engine control module (ECM) determines that the engine oil should be changed. The IPC receives a serial data message from the ECM requesting illumination. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting.
The instrument panel cluster (IPC) illuminates the CHECK GAGES indicator under the following conditions:
• | The engine coolant temperature exceeds 125°C (257°F). The IPC receives a serial data message from the engine control module (ECM) indicating the engine coolant temperature. |
• | The engine oil pressure is low. The IPC receives a serial data message from the ECM indicating the engine oil pressure. |
• | The IPC has not been programmed after an IPC replacement. Refer to Service Programming System (SPS). |
The instrument panel cluster (IPC) illuminates the CHECK GAS CAP indicator in the message center when the gas cap is not tightened properly. The IPC receives a serial data message from the engine control module (ECM) or the engine control module (ECM) indicating fuel tank pressure.
The instrument panel cluster (IPC) illuminates the CHECK OIL LEVEL message in the driver information center (DIC) when the engine control module (ECM) detects a low engine oil level condition. The ECM only monitors the oil level switch signal circuit for a brief period between key on and ignition crank. The IPC receives a serial data message from the ECM requesting illumination.
The instrument panel cluster (IPC) illuminates the FUEL LEVEL LOW message in the driver information center (DIC) when the IPC detects that the fuel level is less than a pre-determined value. The IPC receives a serial data message from the engine control module (ECM) indicating fuel level percent.
The instrument panel cluster (IPC) illuminates the ICE POSSIBLE message in the DIC when the outside air temperature drops below 4°C (39°F). The IPC receives a serial data message from the body control module (BCM) indicating the outside air temperature.
The instrument panel cluster (IPC) illuminates the OIL LIFE RESET message when the engine control module (ECM) determines that the engine oil should be changed. The IPC receives a serial data message from the ECM indicating the remaining oil life percent. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting.
The instrument panel cluster (IPC) illuminates the OIL PRESSURE LOW STOP ENGINE message in the driver information center (DIC) when the engine control module (ECM) detects a low oil pressure condition with the signal circuit low. The IPC receives a serial data message from the ECM requesting illumination.
The instrument panel cluster (IPC) illuminates the OVERSPEED indicator when the IPC detects that the vehicle speed is more than 120 km/h (75 mph).
The instrument panel cluster (IPC) illuminates the PROGRAM CLUSTER message in the driver information center (DIC) when the IPC has not been programmed after an IPC replacement. Refer to Service Programming System (SPS).
The instrument panel cluster (IPC) illuminates the TIGHTEN FUEL CAP message in the driver information center (DIC) when the engine control module (ECM) detects a low fuel pressure condition. The IPC receives a serial data message from the ECM requesting illumination.