GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 TrailBlazer - 4WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front Fog Lamp Replacement

Front Fog Lamp Replacement Envoy, TrailBlazer

Removal Procedure
  1. Remove the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement.

    2. Object Number: 742553 Size: SH
  2. Remove the 3 nuts that retain the fog lamp to the fascia (2).
  3. Remove the fog lamp from the fascia.

Installation Procedure

    Object Number: 742553 Size: SH
  1. Install the fog lamp to the fascia (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the 3 fog lamp retaining nuts.

    3. Tighten
    Tighten the nuts to 10.0 N·m (88 lb in).

  3. Install the fog lamp bulb and socket. Refer to Front Fog Lamp Bulb Replacement.
  4. Aim the fog lamp(s). Refer to Fog Lamp Aiming.

Front Fog Lamp Replacement TrailBlazer SS


Object Number: 1670463 Size: SF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Reposition the lower radiator air baffle in order to access the fog lamp adjuster bolts.
  3. Disconnect the electrical connector from the fog lamp bulb socket.

1

Caution: Refer to Fastener Caution in the Preface section.

Front Fog Lamp Adjuster Bolts

Tip
Remove the 2 horizontal adjusting bolts from the fog lamp bracket assembly.

Tighten
10 N·m (89 lb in)

2

Front Fog Lamp Bracket Retention Clips

Tip
Release the clips in order to remove the housing from the bracket.

3

Fog Lamp Housing

Tip

    • Upon reassembly, ensure the housing is secure to the retention clips on the fog lamp bracket.
    • Aim the fog lamps after replacement. Refer to Fog Lamp Aiming.