GM Service Manual Online
For 1990-2009 cars only

Removal Procedures


    Object Number: 831869  Size: SH
  1. Remove rocker panel assembly. Refer to Rocker Panel Molding Replacement.
  2. Remove the door opening screws (1) from front of rocker panel rear molding.
  3. Release push-in retainers (2) using a trim removal tool.
  4. Caution: Use a plastic, flat-bladed tool to prevent paint damage when removing an emblem/name plate.

  5. Remove the rocker panel molding from the rocker panel.

Installation Procedure


    Object Number: 831869  Size: SH
  1. Position the rocker molding to the holes in the rocker panel.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the door opening screws (1).
  4. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  5. Install push-in retainers.