GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1347079  Size: SH
  1. Remove the fastener access cover (1).
  2. Remove the bolt (2) retaining the applique to the roof.
  3. Place the tape along the lower end of the applique in order to protect the painted surfaces.
  4. Lift the front of the applique (3) in order to visually see the snap-in fasteners.
  5. Starting from the front, working rearward, insert a long flat-bladed tool between the applique and the fastener and twist the tool in order to release the 4 fasteners.
  6. Remove the applique (3).
  7. Inspect the applique and snap-in fasteners for damage.

Installation Procedure


    Object Number: 1347079  Size: SH
  1. Align the applique (3) to the vehicle.
  2. Insert the upper flange into the roof rail (4).
  3. Align the snap-in fasteners to the holes in the roof.
  4. Press the applique downward until all 4 fasteners lock into place.
  5. Caution: Refer to Fastener Caution in the Preface section.

  6. Install the bolts (2).
  7. Tighten
    Tighten the bolts (2) to 10 N·m (89 lb in).

  8. Install the fastener access covers (1).