• |
Vehicles involved in accidents involving
the following conditions may also have a damaged or misaligned steering column: |
- | Major body or sheet metal damage |
- | Where the steering column has been impacted |
- | Where supplemental inflatable restraint systems deployed |
• | Inspect the capsules on the steering column bracket assembly.
All capsules must be securely seated in the bracket slots and inspected for
any loose conditions when pushed or pulled by hand. |
• | Observe how the bracket is attached to the jacket assembly. |
- | If the capsules are not securely seated and the bracket is bolted
to the jacket assembly, replace only the bracket. |
- | If the capsules are not securely seated and the bracket is welded
to the jacket assembly, replace only the jacket assembly. |
• |
Inspect for tab (1) breakage on
the bearing and adapter assembly. |
• |
Visually inspect the steering shaft for
sheared injected plastic (1). If the steering shaft shows sheared plastic,
replace the steering shaft. |
• | Any frame damage that could cause a bent steering shaft must have
the steering shaft runout checked. Using a dial indicator at the lower end
of the steering shaft, rotate the steering wheel. The runout must not exceed
1.60 mm (0.06 in). |