Removal Procedure
- Using a flat-bladed tool, carefully remove the finish covers (3) from the luggage carrier side rails (2).
- Unlock the cross rails (4) by releasing the locking tab (1) on the end of each cross rail.
- Slide the cross rails forward and remove from the side rails.
- Remove the bolts that retain the side rails to the roof panel.
- Remove the side rails from the roof panel.
Installation Procedure
- Position the side rails (2) to the roof panel.
Caution: Refer to Fastener Caution in the Preface section.
- Install the bolts which retain the side rails to the roof panel, starting with the rearmost bolt first on each side.
Tighten
Tighten the luggage carrier side rail bolts to 5 N·m (44 lb in).
Note: Ensure that the loops on the cross rails are indexed toward the front of the vehicle.
- Install the cross rails (4) to the side rails.
- Lock the cross rails to the slide rails.
- Install and secure the finish covers (3) to the side rails.