GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 TrailBlazer - 4WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Number 1 Head Restraint Retractor Assembly Replacement

Removal Procedure

    Warning: Refer to Prevent Accidental Deployment of the Head Restraint Retractor Assembly Warning in the Preface section.

  1. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement.

    2. Object Number: 753545 Size: SH
  2. Remove the 3 bolts that retain the head restraint retractor assembly to the seat back frame.

    3. Object Number: 753546 Size: SH
  3. Partially remove the head restraint retractor assembly from the frame.

    4. Object Number: 753547 Size: SH
  4. Remove the release cable by sliding the cable retainer over to the large access hole and removing the cable from the head restraint retractor assembly.
  5. Remove the retractor assembly from the seat back frame.

Installation Procedure

    Object Number: 753546 Size: SH
  1. Position the head restraint retractor assembly to the seat back.

    2. Object Number: 753547 Size: SH
  2. Install the release cable through the head restraint retractor assembly access hole and sliding the cable retainer into position.

    3. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 753545 Size: SH
  3. Install the 3 bolts that retain the head restraint retractor assembly to the seat back frame and tighten to 10 N·m (88 lb in).
  4. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement.