Removal Procedure
- Remove the I/P carrier. Refer to
Instrument Panel Carrier Replacement.
- Remove the left side air temperature actuator (1) retaining screws.
- Disconnect the left side air temperature actuator electrical connector.
- Remove the left side air temperature actuator.
Installation Procedure
- Install the left side air temperature actuator (1).
Caution: Refer to Fastener Caution in the Preface section.
- Install the left side air temperature actuator retaining screws.
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Connect the electrical connector to the left side air temperature actuator.
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement.
- Calibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to
Actuator Recalibration.