GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 TrailBlazer - 4WD 🢒 Safety and Security 🢒 Seat Belts 🢒 Seat Belt Retractor Replacement - No. 2 Right Rear

Removal Procedure
  1. Remove the rear seat belt upper guide shoulder bolt.
  2. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side

    3. Object Number: 830748 Size: SH
  3. Remove the rear seat belt lower anchor nut.
  4. Remove the bolt that retains the seat belt retractor assembly to the body.
  5. Remove the seat belt retractor assembly from the vehicle.

Installation Procedure

    Object Number: 830748 Size: SH
  1. Install the seat belt retractor assembly to the vehicle.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the seat belt retractor assembly to the vehicle.

    3. Tighten
    Tighten the rear seat belt retractor bolts to 70 N·m (52 lb ft).

  3. Install the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side
  4. Install the rear seat belt lower anchor nut. Ensure that the seat belt webbing is not twisted.

    5. Tighten
    Tighten the rear seat mounting nut to 45 N·m (33 lb ft).

  5. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

    6. Tighten
    Tighten the bolt to 70 N·m (52 lb ft).