GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 TrailBlazer - 4WD 🢒 Safety and Security 🢒 Seat Belts 🢒 Seat Belt Retractor Replacement - No. 1 Center Rear

Removal Procedure
  1. Remove the rear seat back assembly. Refer to Rear Seat Number 1 Back Replacement.

    2. Object Number: 753723 Size: SH
  2. Remove the rear seat belt anchor nut from the seat belt buckle bracket.

    3. Object Number: 753729 Size: SH
  3. Remove the rear seat back seat belt bezel by pressing in the buttons (1) on the plastic retainers.

    4. Object Number: 753736 Size: SH
  4. Remove the seat belt bezel from the seat belt.
  5. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement.

    6. Object Number: 757364 Size: SH
  6. Remove the seat belt from the retractor bracket by guiding it through the slot.

    7. Object Number: 753557 Size: SH
  7. Remove the rear seat belt center retractor retaining nut.
  8. Remove the center retractor assembly by pulling the push pin from the seat back frame.

    9. Object Number: 753559 Size: SH
  9. Remove the seat belt retractor bracket bolt (1) from the bracket and seat back frame.
  10. Remove the seat belt retractor bracket from the seat back frame.

Installation Procedure

    Object Number: 757367 Size: SH
  1. Position the seat belt retractor bracket on the seat back frame.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 753559 Size: SH
  2. Install the seat belt retractor bracket bolt (1) to the bracket and seat back frame.

    3. Tighten
    Tighten the seat belt retractor bracket bolt to 55 N·m (40 lb ft).

  3. Position the seat belt retractor assembly onto the seat back frame.
  4. Install the push pin on the seat back retractor to the seat back frame.

    5. Object Number: 753557 Size: SH
  5. Install the rear seat belt center retractor nut.

    6. Tighten
    Tighten the rear seat belt center retractor nut to 35 N·m (26 lb ft).


    Object Number: 757364 Size: SH
  6. Install the seat belt into the retractor bracket by guiding the belt through the slot in the bracket.
  7. Install the rear seat back pad and cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement.
  8. Install the rear seat back seat belt bezel onto the seat belt.

    9. Object Number: 753736 Size: SH
  9. Install the seat belt bezel to the seat back.

    10. Object Number: 753728 Size: SH
  10. Install the seat back bezel push pins.

    11. Object Number: 753723 Size: SH
  11. Install the rear seat belt anchor to the seat belt buckle bracket with the nut.

    12. Tighten
    Tighten the rear seat belt anchor nut to 50 N·m (37 lb ft).

  12. Install the rear seat back assembly. Refer to Rear Seat Number 1 Back Replacement.