Removal Procedure
- Close the window to the full up position.
- Remove the door trim panel. Refer to
Front Side Door Trim Panel Replacement.
- Remove the rear half of the water deflector from the door.
- Release the upper lock rod retainer (1) from the rod.
- Remove the lock rod from the handle assembly.
- Release the lock cylinder rod retainer (2) from the lock rod, if equipped.
- Remove the lock cylinder rod from the handle assembly, if equipped.
- Remove the 2 door handle retaining nuts.
- Remove the handle assembly from the door.
- Remove the lock cylinder from the handle, if equipped. Refer to
Door Lock Cylinder Replacement.
Installation Procedure
- Install the lock cylinder to the handle, if equipped. Refer to
Door Lock Cylinder Replacement.
- Install the handle assembly to the door.
- Install the upper lock rod to the handle assembly.
- Install the lock rod retainer (1).
- Install the lock cylinder rod to the handle assembly, if equipped.
- Install the cylinder lock rod retainer (2), if equipped.
Caution: Refer to Fastener Caution in the Preface section.
- Install the 2 door handle retaining nuts.
Tighten
Tighten the nuts to 10 N·m (88 lb in).
- Attach the rear half of the water deflector to the door.
- Install the door trim panel. Refer to
Front Side Door Trim Panel Replacement.