GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Ignition Coil Replacement - Bank 1

Removal Procedure

    Object Number: 1860397 Size: SH
  1. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s) (4).
  2. Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement

    3. Object Number: 860797 Size: SH
  3. Remove the ignition coil bolt(s).
  4. Remove the ignition coil(s).

Installation Procedure

    Object Number: 860797 Size: SH
  1. Install the ignition coil(s).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition coil bolt(s).

    3. Tighten
    Tighten the bolt(s) to 10 N·m (89 lb in).


    Object Number: 1860397 Size: SH
  3. Connect the engine wiring harness electrical connector(s) (1) to the ignition coil(s) (4).
  4. Install the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement
Loading…
Loading the web debug toolbar…
Attempt #