GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Air Cleaner Outlet Duct Replacement

Removal Procedure

    Object Number: 2065375 Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Disconnect the positive crankcase ventilation (PCV) fresh air tube from the camshaft cover fitting (1).
  3. Disconnect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service.

    4. Object Number: 1860658 Size: SH
  4. Loosen the air cleaner outlet duct clamps (1) at the mass air flow (MAF)/intake air temperature (IAT) sensor and throttle body.
  5. Remove the air cleaner outlet duct.

Installation Procedure

    Object Number: 1860658 Size: SH
  1. Loosely Install the air cleaner outlet duct then install the fuel injector sight shield to ensure proper clearance.
  2. Remove the fuel injector sight shield.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the air cleaner outlet duct clamps (1) to 4 N·m (35 lb in)at the MAF/IAT sensor and throttle body.

    4. Object Number: 2065375 Size: SH
  4. Connect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service.
  5. Connect the PCV fresh air tube to the camshaft cover fitting (1).
  6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.