The rear seat audio (RSA) allows rear seat passengers to listen to and control any of the music sources: radio, CDs, DVDs, or other auxiliary sources. The rear seat passengers can only control the music sources the front seat passengers are not listening to. The sourced audio can be heard through wired headphones plugged into the jacks on the RSA. The RSA receives audio signals from the radio rear audio output circuits.

Schematic Reference

Radio/Navigation System Schematics

Connector End View Reference

Component Connector End Views

Description and Operation

Radio/Audio System Description and Operation

Electrical Information Reference

Scan Tool Reference

Control Module References for scan tool information

1. Radio ON, RSA OFF, verify clear audio is heard from all speakers.

⇒	If audio is inoperative from one or more speakers, refer to Speaker Malfunction.

2. Connect a known good pair of wired headphones into both of the headphone jacks on the RSA controller.
3. Radio ON, RSA ON, cycle through several sources and listen for audio. Verify audio is heard through the headphones.

⇒	If no audio is heard through the headphones, replace the RSA controller.

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for Rear Audio/HVAC module replacement, setup, and programming