GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Body Systems 🢒 Wipers and Washers 🢒 Rear Window Wiper Motor Replacement

Rear Window Wiper Motor Replacement Traverse


Object Number: 2076886 Size: SF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement.
  2. Remove the rear wiper arm assembly. Refer to Rear Window Wiper Arm Replacement.
  3. Disconnect the electrical connector to the rear window wiper motor.

1

Rear Window Wiper Motor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Rear Window Wiper Motor Assembly

Tip

    • Ensure the rear window wiper pivot shaft seal in the liftgate rear window is not damaged when the wiper motor pivot shaft is pulled from the seal.
    • Replace the pivot shaft seal if damaged.

Rear Window Wiper Motor Replacement Acadia


Object Number: 1847036 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement.
  2. Remove the rear wiper arm assembly. Refer to Rear Window Wiper Arm Replacement.
  3. Disconnect the electrical connector.

1

Rear Window Wiper Pivot Shaft Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
19 N·m (14 lb ft)

2

Rear Window Wiper Pivot Shaft Gasket

Procedure

Align the tab on the gasket to the slot on the rear wiper motor upon assembly.

3

Rear Window Wiper Motor Bolt (Qty: 2)

Tighten
10 N·m (89 lb in)

4

Rear Window Wiper Motor Assembly

Rear Window Wiper Motor Replacement Enclave


Object Number: 1866698 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement.
  2. Remove the rear wiper arm assembly. Refer to Rear Window Wiper Arm Replacement.
  3. Disconnect the electrical connector to the rear window wiper motor.

1

Rear Window Wiper Motor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Rear Window Wiper Motor Assembly

Tip

    • Ensure the rear window wiper pivot shaft seal in the liftgate rear window is not damaged when the wiper motor pivot shaft is pulled from the seal.
    • Replace the pivot shaft seal if damaged.

Rear Window Wiper Motor Replacement OUTLOOK


Object Number: 1847036 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the rear liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement.
  2. Remove the rear wiper arm assembly. Refer to Rear Window Wiper Arm Replacement.
  3. Disconnect the electrical connector.

1

Rear Window Wiper Arm Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
19 N·m (14 lb ft)

2

Rear Window Wiper Pivot Shaft Gasket

Procedure

Align the tab on the gasket to the slot on the rear wiper motor upon assembly.

3

Rear Window Wiper Motor Bolt (Qty: 2)

Tighten
10 N·m (89 lb in)

4

Rear Window Wiper Motor Assembly