Front and Rear Side Door Opening Frame Reveal Molding Replacement. Chevrolet Traverse 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front and Rear Side Door Opening Frame Reveal Molding Replacement

Front and Rear Side Door Opening Frame Reveal Molding Replacement Enclave

Callout	Component Name
Preliminary Procedure Open the front and rear door on the side the door opening frame reveal molding will be replaced.
1	Front and Rear Side Door Opening Frame Reveal Molding Integral Clip (Qty: 12)
2	Front and Rear Side Door Opening Frame Reveal Molding Procedure Remove the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement. Carefully release the front frame reveal molding from the butt joint located at the quarter panel bezel joint tie plate. Upon installation, secure the butt joint ends firmly together prior aligning the molding retainer clips to the body panel. Secure the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement.

Callout

Component Name

Open the front and rear door on the side the door opening frame reveal molding will be replaced.

Front and Rear Side Door Opening Frame Reveal Molding Integral Clip (Qty: 12)

Front and Rear Side Door Opening Frame Reveal Molding

Remove the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement.
Carefully release the front frame reveal molding from the butt joint located at the quarter panel bezel joint tie plate.
Upon installation, secure the butt joint ends firmly together prior aligning the molding retainer clips to the body panel.
Secure the front fender upper rear molding. Refer to Front Fender Upper Rear Molding Replacement.