Rocker Panel Extension Molding Replacement. Chevrolet Traverse 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rocker Panel Extension Molding Replacement

Callout	Component Name
1	Rocker Panel Extension Molding Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Rocker Panel Extension Molding Bolt Tighten 5.0 N·m (44 lb in)
3	Rocker Panel Extension Molding Assembly Tip Position the top edge of the molding under the front bottom edge of the rear wheelhouse panel prior to installing the screws.

Callout

Component Name

Rocker Panel Extension Molding Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

Rocker Panel Extension Molding Bolt

Tighten
5.0 N·m (44 lb in)

Rocker Panel Extension Molding Assembly

Tip
Position the top edge of the molding under the front bottom edge of the rear wheelhouse panel prior to installing the screws.