Rear Wheel Opening Molding Replacement. Chevrolet Traverse 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Wheel Opening Molding Replacement

Rear Wheel Opening Molding Replacement Acadia

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Rear Wheel Opening Flare Integral Retainers (Qty: 7) Procedure Secure the center retainer to the center upper wheelhouse opening followed by the remainder of the retainers.
2	Rear Wheel Opening Flare Tabs (Qty: 2)
3	Rear Wheel Opening Flare

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
1	Rear Wheel Opening Flare Integral Retainer (Qty: 7)
2	Rear Wheel Opening Flare Procedure Align the center pin first to the body panel and secure the retainers on each side of the pin.

Callout

Component Name

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

Rear Wheel Opening Flare Integral Retainer (Qty: 7)

Rear Wheel Opening Flare

Align the center pin first to the body panel and secure the retainers on each side of the pin.