1

C Pillar Nameplate

1. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from the bodyside, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Ensure full adhesion of the nameplate to the bodyside is made.

1

C Pillar Emblem / Nameplate

Caution: Refer to Exterior Trim Emblem Removal Caution in the Preface section.

Procedure

1. Use a J 25070 or equivalent to remove the old emblem/nameplate. Clean all adhesive from the bodyside, wipe surface dry with a clean lint-free towel prior to installing new emblem/nameplate.
2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Ensure full adhesion of the nameplate to the bodyside is made.