Rear Number 2 Seat Replacement. Chevrolet Traverse 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Traverse 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Number 2 Seat Replacement

Callout	Component Name
Preliminary Procedure Remove the rear storage compartment. Refer to Rear Storage Compartment Replacement. (If equipped)
1	Rear Seat No. 2 Assembly Bolt (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 55 N·m (41 lb ft)
2	Rear Seat No. 2 Assembly (Qty: 2) Tip Lift the seat upward at the rear of the seat and slide the seat rearward to disengage the adjuster hooks holding the seat to the floor pan.

Callout

Component Name

Remove the rear storage compartment. Refer to Rear Storage Compartment Replacement. (If equipped)

Rear Seat No. 2 Assembly Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
55 N·m (41 lb ft)

Rear Seat No. 2 Assembly (Qty: 2)

Tip
Lift the seat upward at the rear of the seat and slide the seat rearward to disengage the adjuster hooks holding the seat to the floor pan.