GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 LED Indicator Replacement - Vehicle Security System

Removal Procedure
  1. Remove the instrument panel upper trim. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages and Console.

    2. Object Number: 315292 Size: SH
  2. Remove the security indicator lamp from the instrument panel upper trim:
    3. 2.1. Rotate the lamp counterclockwise to approximately ¼ turn.
    2.2. Pull the lamp out.
  3. Disconnect the security indicator lamp electrical connector from the security indicator lamp.

Installation Procedure

    Object Number: 315292 Size: SH
  1. Connect the security indicator lamp electrical connector to the security indicator lamp.
  2. Install the security indicator lamp to the instrument panel upper trim:
    3. 2.1. Insert the lamp.
    2.2. Rotate the lamp clockwise to approximately ¼ turn.
  3. Install the instrument panel upper trim. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages and Console.