GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Uplander 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the load level sensor.
  4. Remove the clamp holding the right park brake cable to the stabilizer shaft.

    5. Object Number: 629208 Size: SH
  5. Remove the left and right side stabilizer shaft insulators and brackets.
  6. Remove the left and right stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .
  7. Remove the spare tire from the spare tire hoist.
  8. Remove the stabilizer shaft.

Installation Procedure
  1. Install the stabilizer shaft.
  2. Install the spare tire to the spare tire hoist.
  3. Install the left and right stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .

    4. Object Number: 629208 Size: SH
  4. Install the left and right stabilizer shaft insulators and brackets.
  5. Install the clamp holding the right park brake cable to the stabilizer shaft.
  6. Install the load level sensor.
  7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  8. Lower the vehicle.