GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Uplander 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Horn Replacement

Removal Procedure
  1. Remove the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement .

    2. Object Number: 1480005 Size: SH
  2. Disconnect the horn electrical connector.
  3. Remove the horn bracket bolt (1) to impact bar.
  4. Remove the horn (2) from the front impact bar.

Installation Procedure

    Object Number: 1480005 Size: SH
  1. Position the horn (2) to the front impact bar.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the horn bracket bolt (1).

    3. Tighten
    Tighten the bolt to 15 N·m (11 lb ft).

  3. Connect the horn electrical connector.
  4. Install the headlamps. Refer to Headlamp Assembly or Headlamp Bulb and/or Cornering, Sidemarker, Park, Turn Signal Bulb Replacement .