Removal Procedure
- Remove the accessory panel from the left rear quarter trim. Refer to
Rear Quarter Trim Panel Replacement - Left Side.
- Disconnect the auxiliary blower motor resistor electrical connector.
- Remove the auxiliary blower motor resistor screws.
- Remove the auxiliary blower motor resistor from the auxiliary HVAC module assembly.
Installation Procedure
- Install the auxiliary blower motor resistor to the auxiliary HVAC module assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the auxiliary blower motor resistor screws.
Tighten
Tighten the screws to 1.6 N·m (14 lb in).
- Connect the auxiliary blower motor resistor electrical connector.
- Install the accessory panel from the left rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Left Side.