GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Uplander 🢒 Engine 🢒 Engine Cooling 🢒 Coolant Heater Cord Replacement

Removal Procedure

    Object Number: 1680725 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the coolant heater cord (1) from the coolant heater.
  3. Remove the coolant heater cord clip (3) from the transaxle bracket.
  4. Cut the coolant heater cord tie strap (2) securing the cord to the engine harness.

    5. Object Number: 1680726 Size: SH
  5. Cut the coolant heater cord tie straps (1) securing the cord to the engine harness.
  6. Lower the vehicle.

    7. Object Number: 1644186 Size: SH
  7. Cut the tie strap (1) securing the coolant heater cord to the diagonal brace.
  8. Remove the coolant heater cord.

Installation Procedure

    Object Number: 1644186 Size: SH
  1. Install the coolant heater cord.
  2. Install a NEW tie strap (1) securing the coolant heater cord to the diagonal brace.

    3. Object Number: 1680726 Size: SH
  3. Raise the vehicle.
  4. Install NEW tie straps (1) securing the cord to the engine harness.

    5. Object Number: 1680725 Size: SH
  5. Install the coolant heater cord clip (3) to the transaxle bracket.
  6. Install a NEW tie strap (2) securing the cord to the engine harness.
  7. Connect the coolant heater cord (1) to the coolant heater.
  8. Lower the vehicle.