Removal Procedure
- Remove the oil pan and the gasket. Refer to
Oil Pan Replacement
.
- Remove the filter (100).
Remove the lip ring seal pressed into the case only if replacement is necessary.
- Inspect the screen for the following foreign material:
| • | Inspect for metal particles. |
| • | Inspect for clutch facing material. |
| • | Inspect for rubber particles. |
| • | Inspect for engine coolant. |
- Determine the source of the contamination if foreign material
is evident. Repair as necessary.
- Clean the screen and allow the screen to dry completely.
Installation Procedure
- If removed, install a
new seal (101).
- Install the filter (100).
- Install the gasket and the oil pan. Refer to
Oil Pan Replacement
.
