Luggage Carrier Replacement for Chevrolet Uplander 2008
Luggage Carrier Replacement Regular Wheelbase
Removal Procedure
Important: Remove the luggage carrier as an assembly.
- Remove the front and rear mounting screws (2) from the luggage carrier (1).
- Remove the center mounting screws, if equipped, from the luggage carrier.
- Remove the luggage carrier from the roof with an assistant.
Installation Procedure
- Position the luggage carrier to the roof with an assistant.
Notice: Refer to Fastener Notice in the Preface section.
- Install the front and rear mounting screws (2) to the luggage carrier (1).
Tighten
Tighten the screws to 6 N·m (53 lb in).
Luggage Carrier Replacement PRO V64
Callout
| Component Name
|
1
| Luggage Carrier Side Rail Screw Plug (Qty: 4)
|
2
| Luggage Carrier Side Rail Screw (Qty: 4)
Notice: Refer to Fastener Notice in the Preface section.
Tighten 6 N·m (53 lb in) |
3
| Luggage Carrier Side Rail (Qty: 2)
|
4
| Luggage Carrier Side Rail Support (Qty: 2)
|
5
| Luggage Carrier Side Rail Screw (Qty: 4)
Tighten 6 N·m (53 lb in) |
6
| Luggage Carrier Side Rail (Qty: 2)
|