Preliminary Procedures

1. Remove the seat from the vehicle.
2. Remove the seat back cover and pad. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
3. Remove the seat cushion frame. Refer to Rear Seat Number 2 Cushion Frame Replacement .
4. Remove the center seat belt retractor. Refer to Seat Belt Retractor Replacement - Center Rear .

1

Floor Latch Release Handle Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Floor Latch Release Handle Assembly