GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander 🢒 Engine 🢒 Engine Electrical 🢒 Engine Mount Strut Replacement - Right Side

Removal Procedure

    Object Number: 1675030 Size: SH
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Loosen and remove the engine mount strut to engine mount strut bracket through bolt (3) and nut (4).

    3. Object Number: 1675028 Size: SH
  3. Loosen and remove the engine mount strut to engine mount strut bracket through bolt (4) and nut (5).
  4. Remove the engine mount strut (6).
  5. Inspect the rubber in the engine mount strut for the following conditions:
    6. • Hardness
    • Splitting
    • Cracking

Installation Procedure

    Object Number: 1675028 Size: SH
  1. Install the engine mount strut (6).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install and tighten the engine mount strut to engine mount strut bracket through bolt (4) and nut (5). Tighten the bolt/nut to 48 N·m (36 lb ft) .

    3. Object Number: 1675030 Size: SH
  3. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  4. Install and tighten the engine mount strut to engine mount strut bracket through bolt (3) and nut (4). Tighten the bolt/nut to 48 N·m (36 lb ft) .